Doca Pcc Counters

DOCA PCC Counters (pcc_counters.sh) — Capabilities

Where to start: pcc_counters.sh is a small bash script with exactly two operations — set (arm the device's PCC diagnostic counters) and query (read and print them). The pattern overview below names the recurring questions. Pick the pattern first, then drill into the H2 that owns the substance. For the how of executing each pattern, jump to TASKS.md.

This file is loaded by SKILL.md. It documents what the script does, the fixed firmware / HW counter set it reports, how it reaches the counters through mst + debugfs, what install / environment it needs, the layered error surface, and the safety posture that flags the set operation as a privileged debugfs write and any CC tuning decision derived from a reading as high-stakes.

Pattern overview

Every pcc_counters.sh question this skill teaches resolves into one of FOUR patterns. The patterns are CLASSES — they apply across every device the script can address.

Two cross-cutting rules that apply to every pattern above:

• set arms, query reads — in that order. query without a prior set reads whatever the device's diag_cnt was last configured for (possibly nothing). The documented sequence in the script's own header comment is “always set first then query”.

• These are firmware / HW diagnostic counters. They exist at the device level and are INDEPENDENT of any custom doca-pcc DPA kernel. Do not condition a reading on a custom kernel being loaded, and do not attribute a counter value to a custom algorithm without independent evidence.

Capabilities and modes

pcc_counters.sh is a bash script installed under the DOCA tools directory on a standard install. There is no daemon, no library to link against, no --help, no --version, and no subcommands beyond the two operations below. The entire interaction model is run the script with two positional arguments, read the printed output.

The two operations — exact contract.

Any first argument other than set or query makes the script print Bad Request: choose 'set' or 'query'. A device the script cannot resolve via mst status -v makes it print ERROR: Bad Device and exit.

Device argument. The second positional argument is an mst device path as shown by sudo mst status -v (e.g. /dev/mst/mt41692_pciconf0). The script greps mst status -v for that device to obtain the bus address, then resolves it to a domain PCI address via lspci -D (filtering for Mellanox / NVIDIA) to build the /sys/kernel/debug/mlx5/<pci>/diag_cnt/ path.

The fixed counter set. Unlike a custom-kernel surface, the counters are a FIXED list baked into the script's query case-statement (firmware / HW PCC diagnostic counters). The agent may name these because they are constant in the source:

The script reads these via the mlx5 diag_cnt debugfs interface; the set is not user-extensible without editing the script (which this skill forbids — see SKILL.md ## What this skill deliberately does not ship).

Version compatibility

For the canonical DOCA version-detection chain and NGC container semantics, see doca-version/SKILL.md. The body lives there; this skill does not duplicate it.

The pcc_counters.sh-specific overlay is:

• Confirm the script is present before assuming availability. It is installed under the DOCA tools directory on a standard install. If the script is absent, route to doca-setup/SKILL.md; do NOT re-implement the script or quote counter values from memory.

• mst / MFT and debugfs are the real preconditions. The script depends on mst status -v resolving the device and on /sys/kernel/debug/mlx5/<pci>/diag_cnt/ being present (debugfs mounted, mlx5 driver loaded). These are environment facts, not DOCA-version facts; confirm them per doca-setup/SKILL.md.

• The counter set is fixed in the script. Counter names do not vary by flag or version at the script level — they are the constant case-statement above. What CAN vary is whether the underlying firmware / driver exposes the diag_cnt interface for a given device generation; confirm on the user's device rather than assuming.

Error taxonomy

The error layers the agent should distinguish, in escalating order:

1. Script-not-present. pcc_counters.sh is not under the DOCA tools directory. Cause: DOCA / MFT not installed, or an install that did not include it. Routing: doca-setup ## configure (doca-setup/TASKS.md#configure).

2. Bad-device. The script prints ERROR: Bad Device. Cause: the mst device path does not match an entry in sudo mst status -v (wrong path, mst service not started, device not present). Fix: run sudo mst start then sudo mst status -v and use the exact device path it lists.

3. Bad-request. The script prints Bad Request: choose 'set' or 'query'. Cause: the first positional argument was something other than set or query (e.g. a guessed list / snapshot / --help). Fix: use exactly set or query.

4. Not-armed-before-query. query runs but the values are stale / zero because set was never run for this device (or the device's diag_cnt was reconfigured by something else). Fix: run set first, then query, per the script's documented order, once. If the same condition recurs after that single recovery, stop; preserve both captures and escalate to layer 7 to identify the external process reconfiguring diag_cnt. Do not repeat privileged arm/read cycles.

5. Debugfs-or-permission. The script cannot read/write /sys/kernel/debug/mlx5/<pci>/diag_cnt/. Cause: not running as root / sudo, debugfs not mounted, or the mlx5 driver does not expose diag_cnt for this device. Fix: run under sudo, confirm mount | grep debugfs, confirm the mlx5 driver is loaded. Route env-side issues to doca-setup ## debug (doca-setup/TASKS.md#debug).

6. Counter-stuck-at-zero. The script runs, the dump prints, but a counter reads 0. Cause is usually correct behaviour — the device genuinely saw no such events (no congestion, no RTT, no drops) — NOT a tool bug. Confirm there is relevant traffic before treating a zero as a finding.

7. Cross-cutting. Script runs cleanly, counters are readable, but the user's question is really about the custom doca-pcc algorithm, firmware PCC configuration, BlueField mode, or driver / firmware behaviour. Route to doca-pcc/SKILL.md, doca-public-knowledge-map/SKILL.md, or doca-debug TASKS.md ## debug (doca-debug/TASKS.md#debug).

Observability

pcc_counters.sh IS an observability primitive — it is the documented way to read the device's firmware PCC diagnostic counters from the command line. Its only output is the printed Counter: <NAME> Value: <n> lines on stdout; it emits no metrics, traces, or DOCA logs of its own.

• Save the full query output (file or paste buffer) when capturing evidence; quote the counter lines verbatim rather than paraphrasing.

• For a before / after comparison, the agent runs set once, then query before the change and query after, and diffs the two captured outputs with standard text tooling (the script has no built-in diff).

• For the custom-algorithm host-side report stream (a separate surface), see doca-pcc CAPABILITIES.md ## Observability (doca-pcc/CAPABILITIES.md#observability).

Safety policy

Overlay on the bundle-wide hardware-safety meta-policy. The rules below are this skill's per-artifact overlay on the cross-cutting rules in doca-hardware-safety CAPABILITIES.md ## Safety policy (doca-hardware-safety/CAPABILITIES.md#safety-policy) (specifically ### Per-artifact overlay pattern (doca-hardware-safety/CAPABILITIES.md#per-artifact-overlay-pattern)). When the two layers disagree, the stricter wins; when either layer says STOP, the agent stops.

query is read-only; set writes to the device's debugfs diag_cnt interface to reconfigure which diagnostic counters are collected. Neither changes dataplane forwarding, but both require root / sudo, and the downstream decisions an agent might derive from a reading are high-stakes.

• set is a privileged debugfs write. It reprograms the device's diagnostic counter selection. It does not change congestion-control behaviour, but it is a root-level write to a kernel debug interface. Before running it, show the exact resolved mst device and PCI BDF, explain that it reprograms diagnostic-counter selection, and obtain the operator's explicit confirmation. Run it on that one intended device, never speculatively across devices.

• The script does not mount debugfs or start mst. Those are separate host-state changes. If either prerequisite is absent, stop and route the remediation through doca-setup; do not perform it implicitly as part of a counter read.

• The reading is evidence; the tuning decision it informs is high-stakes. A misread counter that drives a congestion-control parameter change can destabilize the RDMA / RoCE fabric for every node on the port. The skill captures counters; it refuses to translate a delta into a CC parameter change without the user's own domain analysis.

• Confirm traffic before treating a zero as a finding. A counter at 0 usually means the device saw no such events, not that the tool failed.

• Quote what the script printed. Do not paraphrase or reorder the Counter: ... Value: ... lines; the verbatim output is the artifact downstream debug consumes.

• Never invent a counter name, flag, or subcommand. The script has exactly set / query, two positional arguments, and the fixed counter set above; anything beyond that is a hallucination.

Public-source pointer

The canonical public source for device PCC behaviour and the firmware congestion-control surface is the DOCA / PCC documentation on docs.nvidia.com, reachable through doca-public-knowledge-map ## DOCA tools (doca-public-knowledge-map/SKILL.md#doca-tools). The authoritative source for the script's exact behaviour is the script itself (/opt/mellanox/doca/tools/pcc_counters.sh) on the user's install. For the doca-pcc library that loads custom congestion-control kernels (a separate surface), see doca-pcc/SKILL.md.